Análisis de peso estructural de resina de impresión Onx SprintRay para prótesis fija plural
The objective of this study is to provide scientific evidence on the analysis of the structural weight of a plural fixed prosthesis of a polymeric material obtained by the additive technique (3DPP), in order to offer a viable alternative for the treatment of plural fixed prostheses and dental imp...
| Main Authors: | , |
|---|---|
| Other Authors: | |
| Format: | bachelorThesis |
| Language: | spa |
| Published: |
Universidad de Cuenca
2023
|
| Subjects: | |
| Online Access: | http://dspace.ucuenca.edu.ec/handle/123456789/43001 |
| _version_ | 1785802408551514112 |
|---|---|
| author | Lupú Flores, Billy Darlin Pacurucu Mendieta, Miguel David |
| author2 | Abad Coronel, Cristian Gustavo |
| author_facet | Abad Coronel, Cristian Gustavo Lupú Flores, Billy Darlin Pacurucu Mendieta, Miguel David |
| author_sort | Lupú Flores, Billy Darlin |
| collection | DSpace |
| description | The objective of this study is to provide scientific evidence on the analysis of the structural
weight of a plural fixed prosthesis of a polymeric material obtained by the additive technique
(3DPP), in order to offer a viable alternative for the treatment of plural fixed prostheses and
dental implants. Methods. We worked from a 3D printed resin structure of 4 dental pieces
ranging from pieces 2.3 to 2.6, said structure was subjected to compressive forces that
simulated the masticatory system of the human being by means of a universal test equipment,
a 3D finite element analysis was carried out to determine the deformity of the material. Results.
The mass of the structure was 1.98 gr, in the compressive force tests it supported a load of
1000.88 N, its stress distribution was 16.726 MPa; while its tensile strength was 143,916 MPa.
In the finite element analysis of the 3DPP structure carried out in the Ansys software, a
deformation with a value of 0.001mm was observed, and a stress distribution of the material
of 15.36 MPa. In stress values, a minimum value of 2533.4 MPa and a maximum value of
12667 MPa were recorded. Conclusions. The structural weight of the 3DPP material was
determined, providing important information to take into consideration in the use of PPF, thus
verifying its functionality and performance. |
| format | bachelorThesis |
| id | oai:dspace.ucuenca.edu.ec:123456789-43001 |
| institution | Universidad de Cuenca |
| language | spa |
| publishDate | 2023 |
| publisher | Universidad de Cuenca |
| record_format | dspace |
| spelling | oai:dspace.ucuenca.edu.ec:123456789-430012023-10-03T17:02:13Z Análisis de peso estructural de resina de impresión Onx SprintRay para prótesis fija plural ANÁLISIS DE PESO ESTRUCTURAL DE RESINA DE IMPRESIÓN ONX SPRINTRAY PARA PRÓTESIS FIJA PLURAL Lupú Flores, Billy Darlin Pacurucu Mendieta, Miguel David Abad Coronel, Cristian Gustavo Odontología Resina impresa Peso estructural Prótesis plural fija CIUC::Medicina::Odontología::Rehabilitación Oral The objective of this study is to provide scientific evidence on the analysis of the structural weight of a plural fixed prosthesis of a polymeric material obtained by the additive technique (3DPP), in order to offer a viable alternative for the treatment of plural fixed prostheses and dental implants. Methods. We worked from a 3D printed resin structure of 4 dental pieces ranging from pieces 2.3 to 2.6, said structure was subjected to compressive forces that simulated the masticatory system of the human being by means of a universal test equipment, a 3D finite element analysis was carried out to determine the deformity of the material. Results. The mass of the structure was 1.98 gr, in the compressive force tests it supported a load of 1000.88 N, its stress distribution was 16.726 MPa; while its tensile strength was 143,916 MPa. In the finite element analysis of the 3DPP structure carried out in the Ansys software, a deformation with a value of 0.001mm was observed, and a stress distribution of the material of 15.36 MPa. In stress values, a minimum value of 2533.4 MPa and a maximum value of 12667 MPa were recorded. Conclusions. The structural weight of the 3DPP material was determined, providing important information to take into consideration in the use of PPF, thus verifying its functionality and performance. El objetivo del presente estudio es proveer evidencia científica sobre el análisis del peso estructural de una prótesis fija plural de un material polimérico obtenida por técnica aditiva (3DPP), con la finalidad de ofrecer una alternativa viable para el tratamiento de prótesis fija plural e implantes dentales. Métodos. Se trabajó a partir de una estructura de resina impresa 3D de 4 piezas dentales que van desde las piezas 2.3 a 2.6, dicha estructura se sometió a fuerzas compresivas que simularon el sistema masticatorio del ser humano por medio de un equipo de ensayo universal, se realizó un análisis de elementos finitos 3D, para determinar la deformidad del material. Resultados. La masa de la estructura fue de 1,98 gr, en los ensayos de fuerzas compresivas soportó una carga de 1000,88 N, su distribución de tensión fue de 16,726 MPa; mientras que su fuerza tensional fue 143,916 MPa. En el análisis de elementos finitos de la estructura 3DPP realizado en el software Ansys, se observó una deformación con un valor de 0,001mm, y distribución de tensión del material de 15,36 MPa. En valores de estrés se registró un valor mínimo de 2533,4 MPa y un de máximo 12667 MPa. Conclusiones. Se determinó el peso estructural del material 3DPP, aportando información importante para tomar en consideración en la utilización de PPF, comprobando así la funcionalidad y desempeño de la misma. 0000-0002-5326-681x 2023-10-03T14:28:30Z 2023-10-03T14:28:30Z 2023-10-03 bachelorThesis http://dspace.ucuenca.edu.ec/handle/123456789/43001 spa ODON;731 Attribution-NonCommercial-NoDerivatives 4.0 Internacional http://creativecommons.org/licenses/by-nc-nd/4.0/ openAccess application/pdf 22 páginas application/pdf Universidad de Cuenca |
| spellingShingle | Odontología Resina impresa Peso estructural Prótesis plural fija CIUC::Medicina::Odontología::Rehabilitación Oral Lupú Flores, Billy Darlin Pacurucu Mendieta, Miguel David Análisis de peso estructural de resina de impresión Onx SprintRay para prótesis fija plural |
| title | Análisis de peso estructural de resina de impresión Onx SprintRay para prótesis fija plural |
| title_full | Análisis de peso estructural de resina de impresión Onx SprintRay para prótesis fija plural |
| title_fullStr | Análisis de peso estructural de resina de impresión Onx SprintRay para prótesis fija plural |
| title_full_unstemmed | Análisis de peso estructural de resina de impresión Onx SprintRay para prótesis fija plural |
| title_short | Análisis de peso estructural de resina de impresión Onx SprintRay para prótesis fija plural |
| title_sort | análisis de peso estructural de resina de impresión onx sprintray para prótesis fija plural |
| topic | Odontología Resina impresa Peso estructural Prótesis plural fija CIUC::Medicina::Odontología::Rehabilitación Oral |
| url | http://dspace.ucuenca.edu.ec/handle/123456789/43001 |
| work_keys_str_mv | AT lupufloresbillydarlin analisisdepesoestructuralderesinadeimpresiononxsprintrayparaprotesisfijaplural AT pacurucumendietamigueldavid analisisdepesoestructuralderesinadeimpresiononxsprintrayparaprotesisfijaplural |